Ergebnis 1 bis 4 von 4
  1. #1

    Registriert seit
    06.04.2019
    Alter
    32
    Beiträge
    20

    ESC for MHZ Scorpion 5035/760KV

    Hello all.

    Just getting started on a project with a MHZ Trident F1 hull, MHZ Z drive and MHZ Scorpion 5035/760KV.
    Does anyone have experience with wath ESC to use on this setup?
    I am thinking of 10S lipo. Maybe 12S.

    Sorry that i dont write in german


    Kind regards - Frank

  2. #2
    Avatar von ilcapitanoalex
    Registriert seit
    24.10.2015
    Alter
    49
    Beiträge
    1.368

    AW: ESC for MHZ Scorpion 5035/760KV

    Hello Frank,

    there you have to use a 250A Dlux converted to watercooled ore a 300A swordfish Esc (old Version the black brick) ore something at this size. Better go up on 12S and a little bit smaller Prop ore less pitch like 1.2P

    Like the F1 Tunnels. Please load up some pictures of your build.

    Wbr

    Alexander
    schnell sollte es schon sein, schneller wäre besser

  3. #3

    Registriert seit
    06.04.2019
    Alter
    32
    Beiträge
    20

    Re: AW: ESC for MHZ Scorpion 5035/760KV

    Zitat Zitat von ilcapitanoalex Beitrag anzeigen
    Hello Frank,

    there you have to use a 250A Dlux converted to watercooled ore a 300A swordfish Esc (old Version the black brick) ore something at this size. Better go up on 12S and a little bit smaller Prop ore less pitch like 1.2P

    Like the F1 Tunnels. Please load up some pictures of your build.

    Wbr

    Alexander
    Hi Alexander

    Actually, i have been looking at the Swordfish 300A.
    All three ones actually.. Standard, + and X series.
    Is datalogger needed, or just a fancy gimmick?

    Im a big fan of the F1 hulls.. We are four guys who race small ones, and we have all bought a Trident hull each.
    So the race is on as soon as we are ready

    Will post some pictures later. Maybe of all four, side by side


    Kind regards - Frank

  4. #4
    Avatar von ilcapitanoalex
    Registriert seit
    24.10.2015
    Alter
    49
    Beiträge
    1.368

    AW: ESC for MHZ Scorpion 5035/760KV

    Hi Frank,

    a datalogging System inside is a good Tool to find the best Setup because you can see the Amps and Rotations under load. With logging you can start with a smal Prop and you see how it's working and without the risk to burn down the esc you can do it step by step higher in size. The position of the Prop is also a very important thing it should be not to deep in the Water but i think there you guys have some experience from the smaler F1 Boats.

    Wbr Alexander
    Geändert von ilcapitanoalex (08.04.2019 um 23:37 Uhr)
    schnell sollte es schon sein, schneller wäre besser

Ähnliche Themen

  1. Rumpf für MHZ Scorpion 5035 760kv
    Von mr.sush im Forum Boote allgemein
    Antworten: 22
    Letzter Beitrag: 28.03.2019, 08:35

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •